Recovery Winches

RFM 4×4 can supply and fit a wide range of recovery winches to your vehicle.

16.5TI HEAVYWEIGHT WINCH (INT)

This Warn Industries 16.5ti Series 12 volt electric Winch is vehicle mounted and has a pull capacity of 16,500 pound. It has a 90 feet wire rope. Note: This Winch will require winch mount for proper installation.

Extreme-duty sealing helps protect the winch from the outside elements
Series-wound, high-speed motor provides fast line speed and strong pulls
Exclusive brake design provides superior control while winching
Aluminum control box cover for added protection of the electronics
Durable 3-stage planetary geartrain for smooth, reliable, operation
Remote control with 12′ (3.7m) lead and thermometric LED indicator for operator feedback
Chip-resistant powder-coated finish with primer undercoating for superior corrosion protection
90′ of 7/16″ (27m of 11mm) diameter wire rope
Limited Lifetime Warranty

9.5XP WINCH

This Warn Industries 9.5xp Series 12 volt electric Winch is vehicle mounted and has a pull capacity of 9,500 pound. It has a 100 feet wire rope. Note: This Winch will require winch mount for proper installation.

High-output parallel series wound winch motor is the strongest and most durable in the industry
Extreme-duty winch sealing. Enables superior water resistance
Exclusive brake design. Provides superior operator control when winching
Extended-duty control pack delivers long duty cycle to help you tackle the most demanding pulls
3-Stage planetary geartrain. Proven to be the most reliable efficient and durable design
Remote-mount, next-generation control box allows for various mounting options
Remote control with 12′ (3.7m) lead
High gloss, chip-resistant powder coat finish. Provides superior corrosion resistance
100′ of steel winch rope
Limited Lifetime Warranty

VRS WINCH WITH WIRE ROPE – 9500LBS

With an impressive 4300kgs of pulling power and fast line speed under load, the VRS 9500lb winch is the one vehicle recovery winch no driver, from the novice to the serious off-roader, should be without.

IP68 Water & Dust rating
Textured UV and corrosion resistant finish
Sealed to resist water penetration
Stainless steel hardware and fittings
Heavy duty sealed high amperage contactor controller
Multi-segmented cam activated brake
Powerful pulling power
Fast line speed under load
Designed in Australia for the World

Other Accessories from VRS

Hawse Fairlead – Offset: fir use with synthetic rope
Hawse Fairlead – Standard: for use with synthetic rope
Roller fairlead: 4 way roller fairlead for use with wire rope
VRS Wireless Remote System – Controls winch system wirelessly
VRS Remote Pendant Control
VRS Control Box

EFS Recon Winch R10

EFS is an Australian company that has been developing suspension products for over 20 years. Now they have put that knowledge & experience into a range of 4wd accessories.

Have a look at some of the features and specifications:

10,000lbs / 4,540kg rated single line pull
7.0HP 12volt series wound balanced electric motor Waterproof motor/gearbox
3 stage zinc plated hardened planetary gears
158 : 1 gear ratio
Rotating ring gear clutch with T-handle clutch engagement
18,000lbs SYNTUFF synthetic multistrand rope
High strength antibind nano technology
Abrasion resistant – 10mm diameter – 25 metre length
Full load automatic brake located at the motor side of the drum
Designed for synthetic rope – no heat build up in the drum
Recommended battery 650CCA minimum for winching
Battery leads: 1.83m
Shipping weight: 38kg
Winch dimensions (LxWxH): 562mm x 160mm x 172mm
Packing dimensions (LxWxH): 650mm x 250mm x 410mm
Mounting bolt pattern: 254mm x 114.3mm
Fairlead : Aluminium
Control box relay : 450A
Waterproof
Includes wireless & wired remote 3.6 metre lead

EFS Recon Winch R13

13,000lbs / 5,900kg rated single line pull
6.0HP 12volt series wound balanced electric motor Waterproof motor/gearbox
3 stage zinc plated hardened planetary gears
Rotating ring gear clutch with T-handle clutch engagement
265 : 1 gear ratio
18,000lbs SYNTUFF synthetic multistrand rope
High strength antibind nano technology
Abrasion resistant – 10mm diameter – 25 metre length
Full load automatic brake located at the motor side of the drum
Designed for synthetic rope – no heat build up in the drum
Recommended battery 650CCA minimum for winching
Battery leads: 1.83m
Shipping weight: 38kg
Winch dimensions (LxWxH): 562mm x 160mm x 172mm
Packing dimensions (LxWxH): 650mm x 250mm x 410mm
Mounting bolt pattern: 254mm x 114.3mm
Fairlead : Aluminium
Control box relay : 450A
Waterproof
Includes wireless & wired remote 3.6 metre lead

Runva Winches are an international brand and they have been around for more than 20 years. They are a manufacturer for winches and have sold thousands world wide. Runva offer a synthetic or steel rope and have a huge range to suit any sort of 4×4 vehicle.

Runva Synthetic Winch EWX9500:

Rated Line Pull 9500lb (4309kg)
Motor Series Wound (12V) 4.6kW/6.1HP
Gear Train Full Steel 3 Stage Planetary
Gear Ratio 230:1
Brake Automatic Load Holding Screw Cone
Synthetic Rope 10mm x 26.5M
Drum Size 63mm x 223mm
Mounting Bolt Pattern 254mm x 114.3mm
Overall Dimensions 540mm x 163mm x 217mm
Remote Control 3.7m Handheld Remote/Wireless Remote
Battery Leads Included. 2 x 1.8m Heavy Duty Leads
Finish Grey Powder Coat
Net Weight 30kg
Gross Weight 32kg (includes packaging)

Runva Synthetic Winch EWX9500:

Rated Line Pull 9500lb (4309kg)
Motor Series Wound (24V) 8.0kW/10.7hp
Gear Train Full Steel 3 Stage Planetary
Gear Ratio 110:1 – Extra Low for Extra Speed
Brake Automatic Load Holding Screw Cone
Steel Cable 9.2mm x 26.5m
Mounting Bolt Pattern 254mm x 114.3mm
Overall Dimensions 577mm x 163mm x 217mm
Remote Control 3.7m Handheld Remote/Wireless Remote
Battery Leads Included. 2 x 1.8m Heavy Duty Leads
Finish Grey Powder Coat
Net Weight 37.5kg
Gross Weight 39.5kg (includes packaging)
Warranty Limited Lifetime